dmesg - Intel Core i7-4790T
microcode: microcode updated early to revision 0x25, date = 2018-04-02
Linux version 4.18.9-arch1-1-ARCH (builduser@heftig-19946) (gcc version 8.2.1 20180831 (GCC)) #1 SMP PREEMPT Wed Sep 19 21:19:17 UTC 2018
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable
BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000ca689fff] usable
BIOS-e820: [mem 0x00000000ca68a000-0x00000000ca690fff] ACPI NVS
BIOS-e820: [mem 0x00000000ca691000-0x00000000cb03ffff] usable
BIOS-e820: [mem 0x00000000cb040000-0x00000000cb2fffff] reserved
BIOS-e820: [mem 0x00000000cb300000-0x00000000ddd90fff] usable
BIOS-e820: [mem 0x00000000ddd91000-0x00000000dde22fff] reserved
BIOS-e820: [mem 0x00000000dde23000-0x00000000dde8afff] usable
BIOS-e820: [mem 0x00000000dde8b000-0x00000000ddfcdfff] ACPI NVS
BIOS-e820: [mem 0x00000000ddfce000-0x00000000deffefff] reserved
BIOS-e820: [mem 0x00000000defff000-0x00000000deffffff] usable
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000041dffffff] usable
NX (Execute Disable) protection: active
e820: update [mem 0xc8b31018-0xc8b50657] usable ==> usable
e820: update [mem 0xc8b31018-0xc8b50657] usable ==> usable
e820: update [mem 0xc8b20018-0xc8b30457] usable ==> usable
e820: update [mem 0xc8b20018-0xc8b30457] usable ==> usable
e820: update [mem 0xc8b10018-0xc8b1f857] usable ==> usable
e820: update [mem 0xc8b10018-0xc8b1f857] usable ==> usable
extended physical RAM map:
reserve setup_data: [mem 0x0000000000000000-0x0000000000057fff] usable
reserve setup_data: [mem 0x0000000000058000-0x0000000000058fff] reserved
reserve setup_data: [mem 0x0000000000059000-0x000000000009efff] usable
reserve setup_data: [mem 0x000000000009f000-0x000000000009ffff] reserved
reserve setup_data: [mem 0x0000000000100000-0x00000000c8b10017] usable
reserve setup_data: [mem 0x00000000c8b10018-0x00000000c8b1f857] usable
reserve setup_data: [mem 0x00000000c8b1f858-0x00000000c8b20017] usable
reserve setup_data: [mem 0x00000000c8b20018-0x00000000c8b30457] usable
reserve setup_data: [mem 0x00000000c8b30458-0x00000000c8b31017] usable
reserve setup_data: [mem 0x00000000c8b31018-0x00000000c8b50657] usable
reserve setup_data: [mem 0x00000000c8b50658-0x00000000ca689fff] usable
reserve setup_data: [mem 0x00000000ca68a000-0x00000000ca690fff] ACPI NVS
reserve setup_data: [mem 0x00000000ca691000-0x00000000cb03ffff] usable
reserve setup_data: [mem 0x00000000cb040000-0x00000000cb2fffff] reserved
reserve setup_data: [mem 0x00000000cb300000-0x00000000ddd90fff] usable
reserve setup_data: [mem 0x00000000ddd91000-0x00000000dde22fff] reserved
reserve setup_data: [mem 0x00000000dde23000-0x00000000dde8afff] usable
reserve setup_data: [mem 0x00000000dde8b000-0x00000000ddfcdfff] ACPI NVS
reserve setup_data: [mem 0x00000000ddfce000-0x00000000deffefff] reserved
reserve setup_data: [mem 0x00000000defff000-0x00000000deffffff] usable
reserve setup_data: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
reserve setup_data: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
reserve setup_data: [mem 0x0000000100000000-0x000000041dffffff] usable
efi: EFI v2.31 by American Megatrends
efi: ACPI 2.0=0xddf93000 ACPI=0xddf93000 SMBIOS=0xf04c0 MPS=0xfd460
SMBIOS 2.7 present.
DMI: Gigabyte Technology Co., Ltd. H97N-WIFI/H97N-WIFI, BIOS F9b 03/03/2016
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
last_pfn = 0x41e000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-DFFFF uncachable
E0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0000000000 mask 7C00000000 write-back
1 base 0400000000 mask 7FF0000000 write-back
2 base 0410000000 mask 7FF8000000 write-back
3 base 0418000000 mask 7FFC000000 write-back
4 base 041C000000 mask 7FFE000000 write-back
5 base 00E0000000 mask 7FE0000000 uncachable
6 disabled
7 disabled
8 disabled
9 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
total RAM covered: 16352M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 64M num_reg: 7 lose cover RAM: 0G
e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
last_pfn = 0xdf000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd740-0x000fd74f] mapped at [(____ptrval____)]
Scanning 1 areas for low memory corruption
Base memory trampoline at [(____ptrval____)] 97000 size 24576
Using GB pages for direct mapping
BRK [0xa30a1000, 0xa30a1fff] PGTABLE
BRK [0xa30a2000, 0xa30a2fff] PGTABLE
BRK [0xa30a3000, 0xa30a3fff] PGTABLE
BRK [0xa30a4000, 0xa30a4fff] PGTABLE
BRK [0xa30a5000, 0xa30a5fff] PGTABLE
BRK [0xa30a6000, 0xa30a6fff] PGTABLE
BRK [0xa30a7000, 0xa30a7fff] PGTABLE
BRK [0xa30a8000, 0xa30a8fff] PGTABLE
BRK [0xa30a9000, 0xa30a9fff] PGTABLE
BRK [0xa30aa000, 0xa30aafff] PGTABLE
Secure boot disabled
RAMDISK: [mem 0x7f69c000-0x7fffefff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000DDF93000 000024 (v02 ALASKA)
ACPI: XSDT 0x00000000DDF93080 00007C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x00000000DDFA36C8 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 0x00000000DDF93190 010538 (v02 ALASKA A M I 00000088 INTL 20120711)
ACPI: FACS 0x00000000DDFCC080 000040
ACPI: APIC 0x00000000DDFA37D8 000092 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x00000000DDFA3870 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: SSDT 0x00000000DDFA38B8 000BEE (v01 Ther_R Ther_Rvp 00001000 INTL 20120711)
ACPI: SSDT 0x00000000DDFA44A8 000539 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
ACPI: SSDT 0x00000000DDFA49E8 000B74 (v01 CpuRef CpuSsdt 00003000 INTL 20051117)
ACPI: MCFG 0x00000000DDFA5560 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: HPET 0x00000000DDFA55A0 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
ACPI: SSDT 0x00000000DDFA55D8 00036D (v01 SataRe SataTabl 00001000 INTL 20120711)
ACPI: SSDT 0x00000000DDFA5948 005B5E (v01 SaSsdt SaSsdt 00003000 INTL 20120711)
ACPI: DMAR 0x00000000DDFAB4A8 000078 (v01 INTEL BDW 00000001 INTL 00000001)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000041dffffff]
NODE_DATA(0) allocated [mem 0x41dffa000-0x41dffdfff]
tsc: Fast TSC calibration using PIT
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000041dffffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x0000000000057fff]
node 0: [mem 0x0000000000059000-0x000000000009efff]
node 0: [mem 0x0000000000100000-0x00000000ca689fff]
node 0: [mem 0x00000000ca691000-0x00000000cb03ffff]
node 0: [mem 0x00000000cb300000-0x00000000ddd90fff]
node 0: [mem 0x00000000dde23000-0x00000000dde8afff]
node 0: [mem 0x00000000defff000-0x00000000deffffff]
node 0: [mem 0x0000000100000000-0x000000041dffffff]
Reserved but unavailable: 9520 pages
Initmem setup node 0 [mem 0x0000000000001000-0x000000041dffffff]
On node 0 totalpages: 4176592
DMA zone: 64 pages used for memmap
DMA zone: 24 pages reserved
DMA zone: 3997 pages, LIFO batch:0
DMA32 zone: 14125 pages used for memmap
DMA32 zone: 903987 pages, LIFO batch:31
Normal zone: 51072 pages used for memmap
Normal zone: 3268608 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: Registered nosave memory: [mem 0xc8b10000-0xc8b10fff]
PM: Registered nosave memory: [mem 0xc8b1f000-0xc8b1ffff]
PM: Registered nosave memory: [mem 0xc8b20000-0xc8b20fff]
PM: Registered nosave memory: [mem 0xc8b30000-0xc8b30fff]
PM: Registered nosave memory: [mem 0xc8b31000-0xc8b31fff]
PM: Registered nosave memory: [mem 0xc8b50000-0xc8b50fff]
PM: Registered nosave memory: [mem 0xca68a000-0xca690fff]
PM: Registered nosave memory: [mem 0xcb040000-0xcb2fffff]
PM: Registered nosave memory: [mem 0xddd91000-0xdde22fff]
PM: Registered nosave memory: [mem 0xdde8b000-0xddfcdfff]
PM: Registered nosave memory: [mem 0xddfce000-0xdeffefff]
PM: Registered nosave memory: [mem 0xdf000000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[mem 0xdf000000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
random: get_random_bytes called from start_kernel+0x95/0x535 with crng_init=0
setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:8 nr_node_ids:1
percpu: Embedded 46 pages/cpu @(____ptrval____) s151552 r8192 d28672 u262144
pcpu-alloc: s151552 r8192 d28672 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists, mobility grouping on. Total pages: 4111307
Policy zone: Normal
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 16138568K/16706368K available (10252K kernel code, 1335K rwdata, 3608K rodata, 1504K init, 636K bss, 567800K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Kernel/User page tables isolation: enabled
ftrace: allocating 34439 entries in 135 pages
Preemptible hierarchical RCU implementation.
CONFIG_RCU_FANOUT set to non-default value of 32
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=8.
RCU priority boosting: priority 1 delay 500 ms.
Tasks RCU enabled.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
NR_IRQS: 20736, nr_irqs: 488, preallocated irqs: 16
Offload RCU callbacks from CPUs: (none).
Console: colour dummy device 80x25
console [tty0] enabled
ACPI: Core revision 20180531
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
hpet clockevent registered
APIC: Switch to symmetric I/O mode setup
DMAR: Host address width 39
DMAR: DRHD base: 0x000000fed90000 flags: 0x1
DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap d2008c20660462 ecap f010da
DMAR: RMRR base: 0x000000deebf000 end: 0x000000deecdfff
DMAR-IR: IOAPIC id 8 under DRHD base 0xfed90000 IOMMU 0
DMAR-IR: HPET id 0 under DRHD base 0xfed90000
DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
DMAR-IR: Enabled IRQ remapping in xapic mode
x2apic: IRQ remapping doesn't support X2APIC mode
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
tsc: Fast TSC calibration using PIT
tsc: Detected 2700.202 MHz processor
clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x26ebfd10ee2, max_idle_ns: 440795215052 ns
Calibrating delay loop (skipped), value calculated using timer frequency.. 5402.42 BogoMIPS (lpj=9000673)
pid_max: default: 32768 minimum: 301
Security Framework initialized
Yama: becoming mindful.
AppArmor: AppArmor disabled by boot time parameter
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
Spectre V2 : Mitigation: Full generic retpoline
Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier
Spectre V2 : Enabling Restricted Speculation for firmware calls
Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
Freeing SMP alternatives memory: 28K
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Core(TM) i7-4790T CPU @ 2.70GHz (family: 0x6, model: 0x3c, stepping: 0x3)
Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
Hierarchical SRCU implementation.
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
smp: Brought up 1 node, 8 CPUs
smpboot: Max logical packages: 1
smpboot: Total of 8 processors activated (43220.36 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
PM: Registering ACPI NVS region [mem 0xca68a000-0xca690fff] (28672 bytes)
PM: Registering ACPI NVS region [mem 0xdde8b000-0xddfcdfff] (1323008 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
futex hash table entries: 2048 (order: 5, 131072 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 11:56:35, date: 09/22/18
NET: Registered protocol family 16
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1537617394.366:1): state=initialized audit_enabled=0 res=1
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Added _OSI(Linux-Dell-Video)
ACPI: 6 ACPI AML tables successfully acquired and loaded
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8EEE4AE88800 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8EEE4B2DC800 0005AA (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8EEE4AE93400 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Enabled 9 GPEs in block 00 to 3F
ACPI: Power Resource [PG00] (on)
ACPI: Power Resource [PG01] (on)
ACPI: Power Resource [PG02] (on)
ACPI: Power Resource [FN00] (off)
ACPI: Power Resource [FN01] (off)
ACPI: Power Resource [FN02] (off)
ACPI: Power Resource [FN03] (off)
ACPI: Power Resource [FN04] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME]
acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability LTR]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfeafffff window]
pci_bus 0000:00: root bus resource [bus 00-3e]
pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000
pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.0: [8086:8cba] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xf7329000-0xf732900f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: [8086:153b] type 00 class 0x020000
pci 0000:00:19.0: reg 0x10: [mem 0xf7300000-0xf731ffff]
pci 0000:00:19.0: reg 0x14: [mem 0xf7328000-0xf7328fff]
pci 0000:00:19.0: reg 0x18: [io 0xf040-0xf05f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:8cad] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xf7327000-0xf73273ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: [8086:8ca0] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xf7320000-0xf7323fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:8c90] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: [8086:8c96] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: [8086:8c98] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:8ca6] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xf7326000-0xf73263ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.0: [8086:8cc6] type 00 class 0x060100
pci 0000:00:1f.2: [8086:8c82] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0xf090-0xf097]
pci 0000:00:1f.2: reg 0x14: [io 0xf080-0xf083]
pci 0000:00:1f.2: reg 0x18: [io 0xf070-0xf077]
pci 0000:00:1f.2: reg 0x1c: [io 0xf060-0xf063]
pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f]
pci 0000:00:1f.2: reg 0x24: [mem 0xf7325000-0xf73257ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:8ca2] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xf7324000-0xf73240ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f]
pci 0000:01:00.0: [10de:1c03] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
pci 0000:01:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref]
pci 0000:01:00.0: BAR 3: assigned to efifb
pci 0000:01:00.1: [10de:10f1] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xf7080000-0xf7083fff]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
acpiphp: Slot [1] registered
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:03:00.0: [1969:1091] type 00 class 0x020000
pci 0000:03:00.0: reg 0x10: [mem 0xf7200000-0xf723ffff 64bit]
pci 0000:03:00.0: reg 0x18: [io 0xd000-0xd07f]
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.3: PCI bridge to [bus 03]
pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.3: bridge window [mem 0xf7200000-0xf72fffff]
pci 0000:04:00.0: [8086:08b1] type 00 class 0x028000
pci 0000:04:00.0: reg 0x10: [mem 0xf7100000-0xf7101fff 64bit]
pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PCI bridge to [bus 04]
pci 0000:00:1c.4: bridge window [mem 0xf7100000-0xf71fffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 4 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs *4 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs *4 6 10 11 12 14 15)
pci 0000:01:00.0: vgaarb: setting as boot VGA device
pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:01:00.0: vgaarb: bridge control possible
vgaarb: loaded
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
EDAC MC: Ver: 3.0.0
Registered efivars operations
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
e820: reserve RAM buffer [mem 0xc8b10018-0xcbffffff]
e820: reserve RAM buffer [mem 0xc8b20018-0xcbffffff]
e820: reserve RAM buffer [mem 0xc8b31018-0xcbffffff]
e820: reserve RAM buffer [mem 0xca68a000-0xcbffffff]
e820: reserve RAM buffer [mem 0xcb040000-0xcbffffff]
e820: reserve RAM buffer [mem 0xddd91000-0xdfffffff]
e820: reserve RAM buffer [mem 0xdde8b000-0xdfffffff]
e820: reserve RAM buffer [mem 0xdf000000-0xdfffffff]
e820: reserve RAM buffer [mem 0x41e000000-0x41fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
clocksource: Switched to clocksource tsc-early
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
pnp: PnP ACPI init
system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [io 0x0800-0x087f] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:03: [io 0x1854-0x1857] has been reserved
system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:04: [io 0x0a00-0x0a0f] has been reserved
system 00:04: [io 0x0a30-0x0a3f] has been reserved
system 00:04: [io 0x0a20-0x0a2f] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:05: [io 0x04d0-0x04d1] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:06: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:06: [mem 0xfed90000-0xfed93fff] could not be reserved
system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:06: [mem 0xff000000-0xffffffff] has been reserved
system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:06: [mem 0xf7fe0000-0xf7feffff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 7 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.3: PCI bridge to [bus 03]
pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.3: bridge window [mem 0xf7200000-0xf72fffff]
pci 0000:00:1c.4: PCI bridge to [bus 04]
pci 0000:00:1c.4: bridge window [mem 0xf7100000-0xf71fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: resource 11 [mem 0xe0000000-0xfeafffff window]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff]
pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:03: resource 1 [mem 0xf7200000-0xf72fffff]
pci_bus 0000:04: resource 1 [mem 0xf7100000-0xf71fffff]
NET: Registered protocol family 2
tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
NET: Registered protocol family 44
pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x6c6 took 18088 usecs
pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x6c6 took 22767 usecs
pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
pci 0000:01:00.1: Linked as a consumer to 0000:01:00.0
pci 0000:03:00.0: set MSI_INTX_DISABLE_BUG flag
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 9612K
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xcd2f6000-0xd12f6000] (64MB) mapped at [(____ptrval____)-(____ptrval____)]
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=41 max_order=22 bucket_order=0
zbud: loaded
pstore: using lz4hc compression
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
io scheduler mq-deadline registered
io scheduler kyber registered
io scheduler bfq registered
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
efifb: probing for efifb
efifb: framebuffer at 0xf1000000, using 3072k, total 3072k
efifb: mode is 1024x768x32, linelength=4096, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 128x48
fb0: EFI VGA frame buffer device
intel_idle: MWAIT substates: 0x42120
intel_idle: v0.4.1 model 0x3C
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (28 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (30 C)
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: registered as rtc0
rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
intel_pstate: Intel P-state driver initializing
ledtrig-cpu: registered to indicate activity on CPUs
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
RAS: Correctable Errors collector initialized.
microcode: sig=0x306c3, pf=0x2, revision=0x25
microcode: Microcode Update Driver: v2.2.
sched_clock: Marking stable (611362552, 0)->(602424539, 8938013)
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 383ffa8379c82d154075bba04ee7c064ed536b2d'
zswap: loaded using pool lzo/zbud
Key type big_key registered
Magic number: 2:728:934
rtc_cmos 00:02: setting system clock to 2018-09-22 11:56:35 UTC (1537617395)
Freeing unused kernel image memory: 1504K
Write protecting the kernel read-only data: 16384k
Freeing unused kernel image memory: 2008K
Freeing unused kernel image memory: 488K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
x86/mm: Checking user space page tables
x86/mm: Checked W+X mappings: passed, no W+X pages found.
SCSI subsystem initialized
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
libata version 3.00 loaded.
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x30 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7327000
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: DUMMY
ata2: DUMMY
ata3: DUMMY
ata4: DUMMY
ata5: SATA max UDMA/133 abar m2048@0xf7325000 port 0xf7325300 irq 25
ata6: SATA max UDMA/133 abar m2048@0xf7325000 port 0xf7325380 irq 25
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 4.18.9-arch1-1-ARCH ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7326000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 4.18.9-arch1-1-ARCH ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata5.00: supports DRM functions and may not be fully accessible
ata6.00: supports DRM functions and may not be fully accessible
ata5.00: ATA-10: Crucial_CT275MX300SSD1, M0CR060, max UDMA/133
ata5.00: 537234768 sectors, multi 16: LBA48 NCQ (depth 32), AA
ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata5.00: supports DRM functions and may not be fully accessible
ata5.00: configured for UDMA/133
scsi 4:0:0:0: Direct-Access ATA Crucial_CT275MX3 R060 PQ: 0 ANSI: 5
ata6.00: disabling queued TRIM support
ata6.00: ATA-9: Crucial_CT128MX100SSD1, MU01, max UDMA/133
ata6.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 32), AA
usb 1-1: new high-speed USB device number 2 using ehci-pci
ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata6.00: supports DRM functions and may not be fully accessible
ata6.00: disabling queued TRIM support
usb 2-1: new high-speed USB device number 2 using ehci-pci
ata6.00: configured for UDMA/133
scsi 5:0:0:0: Direct-Access ATA Crucial_CT128MX1 MU01 PQ: 0 ANSI: 5
ata5.00: Enabling discard_zeroes_data
ata6.00: Enabling discard_zeroes_data
sd 4:0:0:0: [sda] 537234768 512-byte logical blocks: (275 GB/256 GiB)
sd 4:0:0:0: [sda] Write Protect is off
sd 5:0:0:0: [sdb] 250069680 512-byte logical blocks: (128 GB/119 GiB)
sd 5:0:0:0: [sdb] 4096-byte physical blocks
sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sdb] Write Protect is off
sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata5.00: Enabling discard_zeroes_data
ata6.00: Enabling discard_zeroes_data
sda: sda1
ata5.00: Enabling discard_zeroes_data
sdb: sdb1 sdb2
ata6.00: Enabling discard_zeroes_data
sd 4:0:0:0: [sda] supports TCG Opal
sd 4:0:0:0: [sda] Attached SCSI disk
sd 5:0:0:0: [sdb] supports TCG Opal
sd 5:0:0:0: [sdb] Attached SCSI disk
random: fast init done
usb 1-1: New USB device found, idVendor=8087, idProduct=8009, bcdDevice= 0.00
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null)
usb 2-1: New USB device found, idVendor=8087, idProduct=8001, bcdDevice= 0.00
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
systemd[1]: systemd 239 running in system mode. (+PAM +AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Created slice User and Session Slice.
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Reached target Remote File Systems.
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Listening on Process Core Dump Socket.
systemd[1]: Listening on LVM2 metadata daemon socket.
EXT4-fs (sdb2): re-mounted. Opts: discard,data=ordered
hidraw: raw HID events driver (C) Jiri Kosina
tsc: Refined TSC clocksource calibration: 2699.997 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x26eb3b476f1, max_idle_ns: 440795203562 ns
clocksource: Switched to clocksource tsc
audit: type=1130 audit(1537617396.485:2): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-random-seed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1537617396.489:3): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=lvm2-lvmetad comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1537617396.489:4): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-binfmt comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
vboxdrv: loading out-of-tree module taints kernel.
vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
vboxdrv: Found 8 processor cores
audit: type=1130 audit(1537617396.509:5): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1537617396.512:6): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-sysusers comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
systemd-journald[277]: Received request to flush runtime journal from PID 1
vboxdrv: TSC mode is Invariant, tentative frequency 2699996455 Hz
vboxdrv: Successfully loaded version 5.2.18 (interface 0x00290001)
VBoxPciLinuxInit
vboxpci: IOMMU not found (not registered)
audit: type=1130 audit(1537617396.522:7): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udev-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
VBoxNetAdp: Successfully started.
audit: type=1130 audit(1537617396.525:8): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-setup-dev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
VBoxNetFlt: Successfully started.
audit: type=1130 audit(1537617396.529:9): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-modules-load comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1537617396.542:10): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-sysctl comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
usb 1-1.3: new full-speed USB device number 3 using ehci-pci
usb 2-1.3: new full-speed USB device number 3 using ehci-pci
i801_smbus 0000:00:1f.3: enabling device (0001 -> 0003)
i801_smbus 0000:00:1f.3: SPD Write Disable is set
i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
alx 0000:03:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [fc:aa:14:2b:78:3b]
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
input: PC Speaker as /devices/platform/pcspkr/input/input3
usb 1-1.3: New USB device found, idVendor=045e, idProduct=0719, bcdDevice= 1.00
usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.3: Product: Xbox 360 Wireless Receiver for Windows
usb 1-1.3: Manufacturer: ©Microsoft
usb 1-1.3: SerialNumber: FE65AC10
RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
RAPL PMU: hw unit of domain package 2^-14 Joules
RAPL PMU: hw unit of domain dram 2^-14 Joules
RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
ipmi message handler version 39.2
ipmi device interface
Linux agpgart interface v0.103
usb 2-1.3: New USB device found, idVendor=1e7d, idProduct=2dbe, bcdDevice= 1.01
usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.3: Product: ROCCAT Kone Pure
usb 2-1.3: Manufacturer: ROCCAT
alx 0000:03:00.0 enp3s0: renamed from eth0
cryptd: max_cpu_qlen set to 1000
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
gpio_ich: GPIO from 436 to 511 on gpio_ich
cfg80211: Loading compiled-in X.509 certificates for regulatory database
usb 1-1.4: new full-speed USB device number 4 using ehci-pci
cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
cfg80211: failed to load regulatory.db
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
snd_hda_intel 0000:01:00.1: Disabling MSI
snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
usb 2-1.4: new high-speed USB device number 4 using ehci-pci
Intel(R) Wireless WiFi driver for Linux
Copyright(c) 2003- 2015 Intel Corporation
iwlwifi 0000:04:00.0: enabling device (0000 -> 0002)
iwlwifi 0000:04:00.0: loaded firmware version 17.948900127.0 op_mode iwlmvm
snd_hda_codec_realtek hdaudioC0D2: autoconfig for ALC892: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
snd_hda_codec_realtek hdaudioC0D2: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D2: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D2: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D2: dig-out=0x11/0x1e
snd_hda_codec_realtek hdaudioC0D2: inputs:
snd_hda_codec_realtek hdaudioC0D2: Front Mic=0x19
snd_hda_codec_realtek hdaudioC0D2: Rear Mic=0x18
snd_hda_codec_realtek hdaudioC0D2: Line=0x1a
e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input4
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: ROCCAT ROCCAT Kone Pure as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/0003:1E7D:2DBE.0001/input/input11
usbcore: registered new interface driver xpad
usb 1-1.4: New USB device found, idVendor=0909, idProduct=001c, bcdDevice= 1.00
usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.4: Product: AT2020USB+
usb 1-1.4: Manufacturer: audio-technica
input: audio-technica AT2020USB+ Consumer Control as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.3/0003:0909:001C.0003/input/input12
konepure 0003:1E7D:2DBE.0001: input,hiddev0,hidraw0: USB HID v1.00 Mouse [ROCCAT ROCCAT Kone Pure] on usb-0000:00:1d.0-1.3/input0
input: ROCCAT ROCCAT Kone Pure as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.1/0003:1E7D:2DBE.0002/input/input14
usb 2-1.4: New USB device found, idVendor=041e, idProduct=4088, bcdDevice=10.20
usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1.4: Product: VF0700 Live! Cam Chat HD
usb 2-1.4: Manufacturer: Creative Technology Ltd.
usb 2-1.4: SerialNumber: 3C121268
e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) fc:aa:14:2b:78:3d
e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF
e1000e 0000:00:19.0 eno1: renamed from eth0
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
iwlwifi 0000:04:00.0: Detected Intel(R) Dual Band Wireless AC 7260, REV=0x144
nvidia-nvlink: Nvlink Core is being initialized, major device number 238
nvidia 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 396.54 Tue Aug 14 19:02:34 PDT 2018 (using threaded interrupts)
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
intel_rapl: Found RAPL domain dram
iwlwifi 0000:04:00.0: base HW address: f8:16:54:3a:b4:6b
hid-generic 0003:0909:001C.0003: input,hiddev1,hidraw1: USB HID v1.00 Device [audio-technica AT2020USB+] on usb-0000:00:1a.0-1.4/input3
nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 396.54 Tue Aug 14 23:08:44 PDT 2018
media: Linux media interface: v0.10
[drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver
[drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:01:00.0 on minor 0
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: discard
usb 2-1.5: new full-speed USB device number 5 using ehci-pci
videodev: Linux video capture interface: v2.00
uvcvideo: Found UVC 1.00 device VF0700 Live! Cam Chat HD (041e:4088)
uvcvideo 2-1.4:1.0: Entity type for entity Extension 4 was not initialized!
uvcvideo 2-1.4:1.0: Entity type for entity Extension 3 was not initialized!
uvcvideo 2-1.4:1.0: Entity type for entity Processing 2 was not initialized!
uvcvideo 2-1.4:1.0: Entity type for entity Camera 1 was not initialized!
input: VF0700 Live! Cam Chat HD: VF070 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/input/input15
konepure 0003:1E7D:2DBE.0002: input,hidraw2: USB HID v1.11 Keyboard [ROCCAT ROCCAT Kone Pure] on usb-0000:00:1d.0-1.3/input1
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
mousedev: PS/2 mouse device common for all mice
usb 1-1.5: new full-speed USB device number 5 using ehci-pci
usb 2-1.5: New USB device found, idVendor=04d9, idProduct=0171, bcdDevice=21.02
usb 2-1.5: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 2-1.5: Product: USB-HID Keyboard
input: USB-HID Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/0003:04D9:0171.0004/input/input16
hid-generic 0003:04D9:0171.0004: input,hidraw3: USB HID v1.11 Keyboard [USB-HID Keyboard] on usb-0000:00:1d.0-1.5/input0
hid-generic 0003:04D9:0171.0005: hiddev2,hidraw4: USB HID v1.11 Device [USB-HID Keyboard] on usb-0000:00:1d.0-1.5/input1
usb 1-1.5: New USB device found, idVendor=8087, idProduct=07dc, bcdDevice= 0.01
usb 1-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
input: USB-HID Keyboard System Control as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.2/0003:04D9:0171.0006/input/input17
ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
iwlwifi 0000:04:00.0 wlp4s0: renamed from wlan0
Bluetooth: Core ver 2.22
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
it87: Found IT8620E chip at 0xa30, revision 4
it87: Beeping is supported
input: USB-HID Keyboard Consumer Control as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.2/0003:04D9:0171.0006/input/input18
input: USB-HID Keyboard Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.2/0003:04D9:0171.0006/input/input19
input: USB-HID Keyboard Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.2/0003:04D9:0171.0006/input/input20
hid-generic 0003:04D9:0171.0006: input,hidraw5: USB HID v1.11 Mouse [USB-HID Keyboard] on usb-0000:00:1d.0-1.5/input2
8021q: 802.1Q VLAN Support v1.8
usbcore: registered new interface driver btusb
Bluetooth: hci0: read Intel version: 370710018002030d57
Bluetooth: hci0: Intel device is already patched. patch num: 57
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
usb 2-1.6: new full-speed USB device number 6 using ehci-pci
usb 2-1.4: Warning! Unlikely big volume range (=5632), cval->res is probably wrong.
usb 2-1.4: [2] FU [Mic Capture Volume] ch = 1, val = -5632/0/1
usbcore: registered new interface driver snd-usb-audio
usb 2-1.6: New USB device found, idVendor=0451, idProduct=2036, bcdDevice= 1.01
usb 2-1.6: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 2-1.6: Product: General Purpose USB Hub
hub 2-1.6:1.0: USB hub found
hub 2-1.6:1.0: 3 ports detected
IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input21
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input22
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input23
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input24
usb 2-1.6.2: new full-speed USB device number 7 using ehci-pci
usb 2-1.6.2: New USB device found, idVendor=1038, idProduct=1212, bcdDevice= 2.00
usb 2-1.6.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.6.2: Product: SteelSeries H Wireless
usb 2-1.6.2: Manufacturer: SteelSeries
hid-generic 0003:1038:1212.0007: hiddev3,hidraw6: USB HID v1.11 Device [SteelSeries SteelSeries H Wireless] on usb-0000:00:1d.0-1.6.2/input0
hid-generic 0003:1038:1212.0008: hiddev4,hidraw7: USB HID v1.11 Device [SteelSeries SteelSeries H Wireless] on usb-0000:00:1d.0-1.6.2/input1
usb 2-1.6.3: new full-speed USB device number 8 using ehci-pci
usb 2-1.6.3: New USB device found, idVendor=1038, idProduct=1220, bcdDevice= 1.00
usb 2-1.6.3: New USB device strings: Mfr=3, Product=4, SerialNumber=0
usb 2-1.6.3: Product: SteelSeries H Wireless
usb 2-1.6.3: Manufacturer: SteelSeries
input: SteelSeries SteelSeries H Wireless Consumer Control as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6.3/2-1.6.3:1.3/0003:1038:1220.0009/input/input25
input: SteelSeries SteelSeries H Wireless as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6.3/2-1.6.3:1.3/0003:1038:1220.0009/input/input26
hid-generic 0003:1038:1220.0009: input,hiddev5,hidraw8: USB HID v1.11 Device [SteelSeries SteelSeries H Wireless] on usb-0000:00:1d.0-1.6.3/input3
e1000e: eno1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready
kauditd_printk_skb: 18 callbacks suppressed
audit: type=1130 audit(1537617401.025:29): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=dhcpcd@eno1 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1537617401.032:30): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-user-sessions comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1537617401.032:31): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=getty@tty1 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1006 audit(1537617401.052:32): pid=627 uid=0 old-auid=4294967295 auid=1000 tty=tty1 old-ses=4294967295 ses=1 res=1
audit: type=1130 audit(1537617401.059:33): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@1000 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1006 audit(1537617401.062:34): pid=629 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=2 res=1
audit: type=1130 audit(1537617401.092:35): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user@1000 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1537617402.159:36): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
resource sanity check: requesting [mem 0x000c0000-0x000fffff], which spans more than PCI Bus 0000:00 [mem 0x000d0000-0x000d3fff window]
caller _nv001112rm+0xe3/0x1d0 [nvidia] mapping multiple BARs
random: crng init done
random: 7 urandom warning(s) missed due to ratelimiting
audit: type=1130 audit(1537617403.732:37): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=polkit comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1537617427.589:38): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1537617482.369:39): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=rtkit-daemon comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11